LED strips and accessories

Flat cable 5 x 0.326 mm Red/Green/Blue/White/Yellow 10 meters  

The TAPEFIX65 is designed to make your installations easier. The bridges allow the tape to be attached to rough surfaces or surfaces unsuitable for the original adhesive. The plugs and silicone maintain the tape's sealing qualities after the original roll has been segmented. - 10 fixing bridges for IP65 type tape - 5 sealing plugs for IP65 type tape - 1 tube of silicone to seal the plugs.  

The TAPEFIX68 is designed to make your installations easier. The bridges allow the tape to be attached to rough surfaces or surfaces unsuitable for the original adhesive. The plugs and silicone maintain the tape's sealing qualities after the original roll has been segmented. - 10 fixing bridges for IP68 type tape - 5 sealing plugs for IP68 type tape - 1 tube of silicone to seal the plugs.  

L-connector for 10 mm monochrome ribbons

L-connector for 10 mm two-color ribbons

L-connector for 10 mm tri-color ribbons  

L-connector for 10 mm four-color ribbons

T-connector for 10 mm monochrome ribbons

T-connector for 10 mm two-color ribbons

T-connector for 10 mm tricolor ribbons  

T-connector for 10 mm four-color ribbons

X-connector for 10 mm monochrome ribbons

X-connector for 10 mm two-color ribbons

X-connector for 10 mm tri-color ribbons  

X-connector for 10 mm four-color ribbons

The TAPECON4FF connector allows a quick and seamless connection between two IP65 (max) tape sections. - For tricolour ribbons - Solderless fastening

The TAPELINK20 connector allows a quick and seamless connection between 2 sections of IP20 tape. - For IP20 tricolour ribbons - Seamless assembly - Cable length: ~40 cm - Cable section: 4 x 0.5 mm².

The TAPELINK61 connector allows you to isolate and therefore protect the connections between your different tape sections, while allowing you to disconnect them at any time. - For tri-colour or monochrome ribbons - Welding ropes - Cable length: 20 cm per connector - Cable cross-section: 4 x 0.2 mm².

The TAPELINK65 cord allows you to isolate and therefore protect the connections between your different tape sections. Its IP65 finish makes it suitable for outdoor use. - For IP65 tricolour ribbons - Seamless assembly - Cable length: 15 cm - Cable section: 4 x 0.5 mm².

The TAPELINK68 connector allows you to isolate and therefore protect the connections between your different tape sections. Its IP68 finish makes it suitable for outdoor use or even immersion - For tri-colour or monochrome ribbons - Welding ropes - Cable length: 20 cm per connector - Cable cross-section: 4 x 0.5 mm².

Aluminum profile for flush mounting 8.5 x 23.1 mm Length 2 m

Aluminium profile 15 x 17 mm Length 2 m

Aluminum profile 18.5 x 18.5 mm 45°. Length 2 m

Double width aluminium profile 15 x 24 mm Length 2 m

Aluminum profile 10.7 x 19.5 mm Length 2 m

Aluminum stair nosing profile Length 2 m  

High profile

Low profile

Angle profile

Crystal diffuser for A, B, C profiles Length 2 m

Frost diffuser for profiles A, B, C Length 2 m

Milk diffuser for profiles A, B, C Length 2 m

Crystal diffuser for D-profiles Length 2 m

Frost diffuser for D-profiles Length 2 m

Milk diffuser for D-profiles Length 2 m

Dome Milk diffuser for TAPEprofil-E Length 2 m