Blast – HIT MUSIC – Fabricant et distributeur en son & lumières

BLAST-08P

Loïc Guillout — Fri, 04 Sep 2026 08:10:41 +0000

A compact speaker, for stand-mounted, monitor or fixed-installation use.
The BLAST-08P is a compact passive speaker designed to accommodate two common uses without additional equipment: mounted on a stand as a front-of-house speaker, or placed on the floor as a monitor. Two M8 rigging points on the rear of the cabinet open up a third option: fixed installation, on a bracket or suspended with eyebolts. The rear panel also features a dual VESA 75 × 75 and 100 × 100 mm mounting pattern. The cabinet is made of plywood with a polyurethane paint finish, ensuring a sturdy construction despite its small size.

Power tailored to the size.
250 W RMS at 8 ohms, delivered by an 8-inch woofer and a 1.35-inch titanium compression driver: the BLAST-08P covers a frequency response range from 60 Hz to 20 kHz with a maximum SPL of 121 dB, making it ideal for supplemental sound reinforcement or near-field monitoring.

Flexible connectivity.
Input available via speakON or screw terminal block, depending on the existing wiring. Output via speakON connector, for easy daisy-chaining to a second speaker.

Key Features:

Compact 8-inch passive speaker, 8 Ω
250 W RMS
1.35-inch titanium compression motor
Plywood box, finished with polyurethane paint
Two M8 rigging points on the rear
speakON input or screw terminal block, speakON output

Technical Specifications:

Impedance: 8 Ω
Power into 8 Ω: 250 W RMS
Frequency response: 60 Hz – 20 kHz
Max SPL: 121 dB
Woofer: 8 inches
Tweeter: 1.35 inches, titanium compression driver
Connections: speakON input or screw terminal block, speakON output
Construction: plywood cabinet, polyurethane paint finish
Rigging: 2 × M8 points (rear panel)
Protection class: IP20
Color: black
Dimensions: 270 × 270 × 435 mm
Net weight: 10 kg

BLAST-12P

Loïc Guillout — Fri, 04 Sep 2026 08:07:08 +0000

A versatile speaker, for stand-mounted, monitor or fixed-installation use.
The BLAST-12P is a passive speaker designed to accommodate two common uses without additional equipment: mounted on a stand as a main front-of-house speaker, or placed on the floor as a stage monitor. Two M8 rigging points on the rear of the cabinet open up a third option: fixed installation, on a bracket or suspended with eyebolts. The cabinet is made of plywood with a polyurethane paint finish, ensuring a sturdy construction that can withstand the repeated handling of regular use.

Power designed to project far.
350 W RMS at 8 ohms, delivered by a 12-inch woofer and a 1.75-inch titanium compression driver: the BLAST-12P delivers a frequency response of 50 Hz to 20 kHz with a maximum SPL of 124 dB, enough to provide sound for a small front-of-house event or hold its own as a monitor.

Handling and Connectivity.
Input and output via speakON connectors (+1/-1), for a secure connection and easy daisy-chaining to a second speaker. A dedicated touring carrying case, the TOURING BAG BLAST-12A, is available as an option.

Key Features:

12-inch passive speaker, 8 Ω
350 W RMS
1.75-inch Titanium Compression Motor
Plywood box, finished with polyurethane paint
Two M8 rigging points on the rear
speakON input/output connectors (+1/-1)
Optional touring carrying bag

Technical Specifications:

Impedance: 8 Ω
Power into 8 Ω: 350 W RMS
Frequency response: 50 Hz – 20 kHz
Max SPL: 124 dB
Dispersion (H × V): 90° × 60°
Woofer: 12 inches
Tweeter: 1.75 inches, titanium compression driver
Connections: speakON input and output (+1/-1)
Construction: plywood cabinet, polyurethane paint finish
Rigging: 2 × M8 points (rear panel)
Protection class: IP20
Color: black
Dimensions: 378 × 375 × 610 mm
Net weight: 18.5 kg

Compatible accessories:

TOURING BAG BLAST-12A: carrying case, compatible with BLAST-12A and BLAST-12P
M8 Eyebolt (4 pcs): M8 eyebolts, enough to equip two speakers

BLAST-15P

Loïc Guillout — Fri, 04 Sep 2026 07:59:01 +0000

A versatile speaker, suitable for stand-mounted, monitor or fixed-installation use.
The BLAST-15P is a passive full-range speaker designed to accommodate two common uses without additional equipment: mounted on a stand as a main front-of-house speaker, or placed on the floor as a stage monitor. Two M8 rigging points on the rear of the cabinet open up a third option: fixed installation, on a bracket or suspended with eyebolts. The cabinet is made of plywood with a polyurethane paint finish, providing a sturdy construction that withstands the repeated handling of regular use.

Power designed to project far.
400 W RMS at 8 ohms, delivered by a 15-inch woofer and a 1.75-inch titanium compression driver: the BLAST-15P delivers a frequency response of 45 Hz to 20 kHz with a maximum SPL of 125 dB at 1 m—more than enough to provide front-of-house sound for small to medium-sized events or to hold its own as a monitor without faltering.

Handling and Connectivity.
A molded recessed handle on each side of the cabinet makes it easy to transport and set up. The BLAST-15P’s beveled design allows it to be used on the floor as a stage monitor, without any additional stands or accessories. Input and output via speakON connectors (+1/-1), for a secure connection and easy daisy-chaining to a second speaker.

Key Features:

15″ full-range passive speaker, 8 Ω
400 W RMS
1.75-inch Titanium Compression Motor
Plywood box, finished with polyurethane paint
Two M8 rigging points on the rear
Recessed handles, beveled design for stage monitor use
speakON input/output connectors (+1/-1)

Technical Specifications:

Model size: 15″
Impedance: 8 Ω
Power into 8 Ω: 400 W RMS
Frequency response: 45 Hz – 20 kHz
Max SPL (at 1 m): 125 dB
Dispersion (H × V): 90° × 60°
Woofer: 15 inches
Tweeter: 1.75 inches, titanium compression driver
Connections: speakON input and output (+1/-1)
Construction: plywood cabinet, polyurethane paint finish
Rigging: 2 × M8 points (rear panel)
Protection class: IP20
Color: black
Dimensions: 411 × 435 × 712 mm
Net weight: 21.5 kg

BLAST-SUB115A

Loïc Guillout — Thu, 09 Apr 2026 14:53:03 +0000

Power built for large setups.
With its 15-inch woofer and 600 W RMS Class D amplifier, the BLAST-SUB115A delivers the bass reinforcement needed for installations and performances that require higher sound pressure levels. Its built-in DSP ensures precise and controlled reproduction across the entire frequency range, without complex settings or tedious manual adjustments. Its stacking notches make it easy to integrate into larger setups, allowing you to cover large areas with ease.

Power and precision in the bass.
The BLAST-SUB115A covers a frequency range from 35 Hz to 115 Hz, with a maximum SPL of 127 dB and a sensitivity of 96 dB. It delivers powerful and precise bass, capable of supporting audio systems in large spaces without ever losing control.

A design built to last.
Made of plywood and finished with a durable polyurethane paint, the BLAST-SUB115A is designed to withstand the rigors of regular professional use, while maintaining a high-quality finish suitable for both permanent installations and frequent transport.

Connectivity and Installation Ergonomics.
The BLAST-SUB115A features a 3-pin XLR/6.35 mm jack combo input and a Link output for connecting an additional speaker, simplifying on-site wiring. An independent volume control and a polarity switch allow for precise system tuning, while the bass boost function adds extra low-frequency gain when the room or setup requires it.

Technical Specifications:

Speaker: 1 x 15-inch
Power: 600 W RMS — Class D amplification
Frequency response: 35 Hz – 115 Hz
Max SPL: 127 dB
Sensitivity: 96 dB (1 W / 1 m)
DSP: built-in (BLAST series-compatible preset)
Inputs: 3-pin XLR / 6.35 mm combo jack, IEC
Output: XLR 3-pin (Link)
Settings: independent volume control, polarity switch, bass boost
Power supply: AC 230 V / 50 Hz
Construction: plywood box, polyurethane paint, stacking notches
Color: black
IP: indoor use
Dimensions (W x D x H): 600 x 460 x 565 mm
Weight: 37 kg
Net weight: 37 kg

BLAST-SUB208A

Loïc Guillout — Wed, 08 Apr 2026 22:03:29 +0000

The ideal companion for installations.
Designed for setups where space-saving is essential, the BLAST-SUB208A is a natural fit for installations and performances where visual discretion matters just as much as sound performance. Its dual 8-inch design allows it to fit into tight spaces without ever sacrificing impact in the low end. Designed for both vertical and horizontal deployment, it adapts to any configuration, and its stacking notches facilitate horizontal setups for wider coverage needs.

Power and precision for the lower end of the spectrum.
Under the hood, the BLAST-SUB208A features a Class D amplifier delivering 300 W RMS per channel at 8 Ω in stereo, driven by an integrated DSP that optimizes sound reproduction across the entire frequency range from 55 Hz to 150 Hz. With a maximum sound pressure level of 123 dB and a sensitivity of 95 dB, it delivers a rich bass presence without ever sacrificing clarity or control.

A design built to last.
Made of plywood and finished with a durable polyurethane paint, the BLAST-SUB208A is designed to withstand repeated handling and professional use, while maintaining a high-quality finish suitable for a permanent installation.

Connectivity and Installation Ergonomics.
The BLAST-SUB208A features a combined XLR-jack input and a Link output for connecting an additional speaker, simplifying on-site wiring. An independent volume control and a polarity reversal switch allow for precise system tuning, while the bass boost function adds that extra punch when the situation calls for it.

Technical Specifications:

Speakers: 2 x 8 inch
Power: 300 W RMS – class D amplification
Frequency response: 55 Hz – 150 Hz
SPL max: 123 dB
Sensitivity: 95 dB (1 W / 1 m)
DSP: integrated
Inputs: XLR 3-pin / combo jack, IEC
Output: XLR 3-pin (Link)
Power supply: AC 230 V / 50 Hz
Construction: plywood, polyurethane paint
Color: black
IP: indoor use
Dimensions (W x D x H): 45.5 x 30.5 x 54.5 cm
Weight: 15.55 kg
Net weight: 15.55 kg

TOURING BAG BLAST-10A

Loïc Guillout — Fri, 14 Mar 2025 16:03:00 +0000

Optimum protection: sturdy case designed for safe transport
Shock absorption: 5 mm polyethylene foam padding for effective speaker protection
Practical: easy to slip on, while leaving handles accessible for easy handling

TOURING BAG BLAST-12A

Loïc Guillout — Fri, 14 Mar 2025 15:59:01 +0000

Optimum protection: sturdy case designed for safe transport
Shock absorption: 5 mm polyethylene foam padding for effective speaker protection
Practical: easy to slip on, while leaving handles accessible for easy handling

BLAST ARRAY12A

Maxence — Fri, 14 Feb 2025 08:45:06 +0000

High-quality active column system offering optimized sound dispersion of 120° x 40°
Sturdy plywood frame with a durable polyurethane paint finish
A 12-inch, 450-watt RMS subwoofer paired with a tower equipped with 8 3.5-inch speakers
Wireless connection between the subwoofer and the top speaker for quick and convenient setup
Built-in dynamic equalizer for powerful, deep bass
DSP processor with multiple presets tailored to different usage scenarios:
- Music Mode
- DJ Mode
- Speech Mode
- Short-range subwoofers for indoor use
- Long-range subwoofers for outdoor use
Two mixable audio inputs for maximum flexibility:
- Input A with level control:
  - Balanced line input (jack/XLR, plus RCA)
  - Built-in Bluetooth receiver
- Input B with level control:
  - Balanced line input (jack/XLR, plus RCA)
  - Balanced microphone input (jack/XLR)
Link output for combining and transmitting the mixed signal from inputs A and B
Carrying cases are included for the subwoofer, the column, and the coupling bar, ensuring protection and ease of transport

BLAST-12A

Maxence — Fri, 14 Feb 2025 08:35:38 +0000

High-quality active loudspeaker, ideal for stand mounting or use as a stage monitor.
Sturdy plywood construction, coated with highly resistant polyurethane paint.
Equipped with a powerful 370 W RMS amplifier, 12″ woofer and 1.75″ titanium tweeter.
Exceptionally clear sound reproduction for an immersive audio experience.
Built-in dynamic equalizer for deep, rich bass.
Integrated DSP processor with multiple presets for different types of use:
- Front mode (stand-alone speaker)
- DJ Mode
- Speech mode
- Scene monitor mode
- High-pass filter for use with subwoofers
Two mixable audio inputs for versatile configuration :
- Input A with level control :
  - Balanced line input (jack/XLR, plus RCA)
  - Built-in Bluetooth receiver
- Input B with level control :
  - Balanced line input (jack/XLR, plus RCA)
  - Balanced microphone input (jack/XLR)
Link output: combines signals from inputs A and B to produce a mixed audio output.
Optional carrying case available for easy protection and transport.

BLAST-10A

Maxence — Fri, 14 Feb 2025 08:25:04 +0000

High-quality active loudspeaker, designed for stand mounting or use as a stage monitor.
Sturdy plywood construction with durable polyurethane paint.
Equipped with a 250 W RMS amplifier, 10″ woofer and 1.35″ titanium tweeter.
Crystal-clear sound reproduction.
Built-in dynamic equalizer for deep, punchy bass.
Advanced DSP processor with multiple presets for different applications:
- Front mode for use as a stand-alone loudspeaker
- DJ Mode
- Speech mode
- Scene monitor mode
- Integrated high-pass filter for use with subwoofers
Mixable dual audio input source :
- Input A with level control :
  - Balanced line input (jack/XLR, plus RCA)
  - Built-in Bluetooth receiver
- Input B with level control :
  - Balanced line input (jack/XLR, plus RCA)
  - Balanced microphone input (jack/XLR)
Link output: provides a mixed signal from both inputs A and B, ideal for daisy-chaining.
Optional carrying case for optimum protection.