Behaves just like a halogen blinder.
The BTI-SPECTRABLAST is a 380 W full color LED audience blinder built around an emulated redshift / amber drift effect: as the intensity dims, the light warms and reddens progressively, exactly the way an incandescent filament does at the tail end of a fade. That detail, invisible on a spec sheet but instantly recognizable to the eye, is what separates a convincing LED blinder from one that stays flat and “artificial” at every intensity. The SPECTRABLAST reproduces this behavior natively, with no complex setup, so it drops into a mixed LED/halogen rig without any visual mismatch. The effect stays optional: it can be switched off to keep a stable, neutral white even at the lowest levels, whenever the halogen look isn’t what you’re after.

A housing built for indoors and out.
The SPECTRABLAST sits in a rugged die-cast aluminum housing. Its IP65 rating means it’s safe for outdoor use, exposed to the weather, while working just as well on an indoor rig: the same fixture covers both, with no separate version to manage depending on where it’s installed. powerCON TRUE1-compatible in/out, weatherproof 5-pin XLR in/out, convertible to 3-pin XLR with the optional BT-XLR5TO3 KIT. Built-in universal 100-240 V, 50/60 Hz power supply. The PROJECTOR CASE 9, a 120 × 60 cm flight case for ten fixtures, is available as an option for transport.

Modular rigging built for creativity.
BTI-BLINDER1 SPLICE CONNECTOR units let multiple blinders be mechanically assembled into lines, circles, squares, or any other layout your imagination comes up with. BTI-BLINDER1 CLAMP CONNECTOR units mount those assemblies straight onto truss. The optional OMEGA BRACKET SMALL offers a conventional hanging mount. The optional BTI-SPECTRABLAST BOWENS adapter opens up a whole range of photographic reflectors and modifiers for even more creative freedom. The SPECTRABLAST uses the same SPLICE and CLAMP connectors as the BTI-BLINDER1 FX: the two models mix freely on the same rig.

A rich RGBALC color engine.
The 380 W RGBALC LED engine delivers excellent CRI, with the redshift / amber drift effect described above available at all times and independent control over every color. CCT presets from 1500 K to 8500 K, covering everything from a strongly warm white to a neutral one.

Full control, no extra hardware required.
5 DMX modes, both 8-bit and 16-bit, from 1 to 12 channels depending on the level of detail needed. A dedicated control channel lets you remotely drive the “red shift” effect, dimmer speed and curve, pixel order, and more. RDM gives access to channel mode, DMX addressing and temperature monitoring. OLED display with touch buttons for straightforward setup. No dedicated controller needed: the system runs fully standalone, with easy daisy-chaining across multiple units.

Key features:

• 380 W RGBALC LED audience blinder, IP65, indoor/outdoor rated
• Emulated redshift / amber drift, switchable, faithfully mimics a halogen blinder
• Rugged die-cast aluminum housing
• Modular rigging via SPLICE and CLAMP connectors, compatible with the BTI-BLINDER1 FX
• CCT presets 1500-8500 K
• 5 DMX modes (8/16-bit), 1 to 12 channels, RDM
• Touch-button OLED display, fully standalone operation
• Built-in universal 100-240 V power supply

Technical specifications:

• Dimensions: 23.2 × 29.3 × 16.2 cm
• Weight: 4.8 kg
• Power input: AC 100-240 V, 50/60 Hz
• Power consumption: 230 W
• Color: black
• Display: OLED
• Fixation: optional omega bracket
• IP rating: outdoor (IP65)
• Control modes: standalone fixed, standalone automatic, manual, DMX
• Protocol: DMX, RDM
• Software: not programmable, upgradable
• DMX channels: 1 to 12
• Max luminous flux: 9780 lm
• Illuminance: 329 lux @ 5 m (62° beam, standard optics)
• Color temperature: 1500 K to 8500 K
• CRI: 90
• Colors: RGBALC (red, green, blue, amber, lime, cyan), color mixing
• Connections in: 5-pin XLR, optional 3-pin XLR, RDM, powerCON TRUE1 or compatible
• Connections out: 5-pin XLR, optional 3-pin XLR, powerCON TRUE1 or compatible

Compatible accessories:

• BTI-BLINDER1 SPLICE CONNECTOR: mechanical assembly connector
• BTI-BLINDER1 CLAMP CONNECTOR: truss mounting connector
• BTI-SPECTRABLAST BOWENS: adapter for photographic reflectors and modifiers
• OMEGA BRACKET SMALL: omega bracket (optional)
• BT-XLR5TO3 KIT: 5-pin to 3-pin XLR conversion kit
• PROJECTOR CASE 9: 120 × 60 cm flight case for ten units (optional)

Power and Rich Color. Reproduction
With its standard 17° beam angle, the BTI-FLATPAR12 delivers over 2,050 lux at 5 meters and exceeds 6,000 lumens, providing a crisp and striking light output even in the most demanding environments. Its five-channel RGBAL palette offers remarkably rich and precise color reproduction, enhanced by a dedicated UV channel for special effects.

Maximum flexibility, total control.
The BTI-FLATPAR12 adapts to any setup thanks to three operating modes. In standalone mode, it offers custom colors, color and CCT presets, or automatic color changes. In master/slave mode, one unit controls the others wirelessly or via XLR cabling for coordinated lighting shows. Finally, in DMX mode—whether wired or wireless—five modes ranging from 2 to 12 channels allow for channel-by-channel custom programming. The built-in wireless receiver/transmitter is 100% compatible with the G4S W-DMX protocol.

Professional Connectivity and Field Ergonomics.
The BTI-FLATPAR12 is equipped with Seetronic power inputs and outputs compatible with powerCON TRUE1 for easy daisy-chaining, as well as waterproof 5-pin XLR connectors that can be converted to 3-pin XLR using the optional BT-XLR5TO3 COMBIKIT. The graphical OLED display with touch-sensitive buttons ensures intuitive navigation through the configuration menus, while the two silent fans maintain optimal thermal stability under all conditions.

Technical specifications:

• Robust flat floodlight for outdoor use with IP65 protection, featuring 12 x 20 W RGBAL+UV LEDs with 17° beam angle, luminous intensity of 2,494 lux at 5 m and luminous flux in excess of 6,000 lm.
• Includes a wireless transceiver fully compatible with the W-DMX G4S protocol for reliable remote control
• Smooth RGBAL color changes with an additional UV channel for special lighting effects
• Several operating modes for great flexibility: stand-alone with custom colors, color presets and CCT or automatic color changes
• Master/slave mode allows the master to control slaves wirelessly or via XLR cabling, facilitating the creation of complex lighting scenarios
• Wired and wireless DMX control with 5 modes available: 2 channels (master + color/CCT), 3 channels (HSV), 7 channels (separate colors + master), 10 channels (separate colors + master + strobe + color/CCT presets + control channel) and 12 channels (10-channel mode with color sets).
• Graphic OLED display with touch-sensitive buttons for intuitive configuration menu navigation
• Quiet, efficient cooling provided by two integrated fans
• Sturdy, versatile mounting bracket for floor mounting thanks to its width, or for structure mounting using M10/M12 hooks or omega brackets.
• powerCON TRUE1 input and output compatible with Seetronic connectors for simplified series connection
• Weatherproof 5-pin XLR input and output connectors can be converted to 3-pin XLR using the optional “BT-XLR5TO3 COMBIKIT” conversion kit.

BTI-FLATPAR12 · IP65 flat floodlight

Built for every situation.

12 × 20 W RGBAL+UV LEDs, 17° beam, over 6,000 lm, built-in W-DMX G4S wireless DMX, OLED touch display.

Learn more →

Ultra-fast zoom for advanced creative effects.
The WASH2S is distinguished by its new-generation ultra-fast zoom motor, enabling much faster zoom movements than the standard WASH2. This enhancement opens up new creative possibilities: dynamic pulsing effects, fast zoom-in/zoom-out synchronized to music, and spectacular visual animations impossible with conventional motors. Its motorized zoom from 3.9° to 37.5° remains versatile, from concentrated beam to wide wash, but now runs at high speed. The RGB halo ring and 12-segment RGB mask with pixel mapping incorporate eye-candy effect macros to create spectacular visual animations without complex programming. Ultra-fast 16-bit pan/tilt movements with automatic position correction and dedicated speed channel enable precise, fluid movements, perfect for dynamic shows and fast light chases.

Professional control and advanced driving.
The BTI-BLIZZARD WASH2S incorporates a wireless DMX receiver (W-DMX / CRMX compatible) and natively supports Art-Net™ and sACN for modern integration into professional control systems. RGB pixels can be controlled in Art-Net™ or sACN while movements remain controlled in DMX, offering total flexibility. With modes ranging from 26 to 133 DMX channels and RDM function for remote configuration, it integrates into all scenic environments. The ultra-fluid 24-bit dimmer offers fast and slow modes, with four curves (linear, square, inverted square, S-curve). Fast, precise 16-bit pan/tilt movements include position correction and a dedicated speed channel. The matrix LCD screen makes menu navigation easy, while the NFC function enables error codes and information to be read (via dedicated app under development), perfect for rental companies.

IP65 ruggedness and acoustic discretion.
IP65 certified, the BTI-BLIZZARD WASH2S is weatherproof (rain, dust) for uncompromising outdoor use. Its super-quiet fan mode makes it perfect for theatrical applications requiring total acoustic discretion. Maximum power consumption: 1000W. Professional connectors: XLR 5-pin (DMX input/output), RJ45 (Art-Net/sACN input/output), powerCON TRUE1 compatible (power chaining input/output). DMX connectors can be easily converted to 3-pin XLR with the BT-XLR5TO3 COMBIKIT kit. Optional battery backup for configuration without mains power. Supplied with omega brackets for quick installation.

Technical specifications:

• High-power outdoor wash head with IP65 protection and silent operation
• Equipped with 19 x 50 W RGBL LEDs for an extended color palette thanks to the use of LIME instead of white, guaranteeing perfect white color with high CRI.
• Constantly high light output: 52,000 lux at 5 m (3.8°) and 950 lux at 5 m (38°)
• Various “Hi-CRI” CCT presets from 1,800 K to 10,000 K
• Motorized zoom with improved speed
• Highly fluid 24-bit dimmer with fast or slow dimming modes and four dimming curves: linear, square, inverse square, S-curve
• RGB halo ring with integrated eye-candy macros
• RGB mask with 12-segment pixel control and built-in effect macros
• Fast 16-bit pan/tilt movements with position correction and pan/tilt speed channel
• Super-quiet fan mode for low-noise environments
• Multiple control modes: from 26 to 133 DMX channels, RDM function for easy remote configuration
• Full compatibility with Art-Net and sACN, pixel control via Art-Net or sACN while controlling movements via DMX
• Integrated wireless DMX receiver, W-DMX / CRMX compatible
• LCD matrix display for intuitive navigation through configuration menus
• NFC function for reading error codes and technical information, dedicated application under development
• Connectors: DMX XLR 5-pin inputs/outputs, RJ45 inputs/outputs, powerCON TRUE1 connector
• DMX inputs/outputs easily converted to XLR 3-pin with BT-XLR5TO3 COMBIKIT
• Optional back-up battery allows settings to be made even when power is off
• Omega brackets included for quick installation

Creative effects and ultra-fast movements.
Its motorized zoom range of 3.9° to 37.5° offers total versatility, from a focused beam to a wide wash. The RGB halo ring and the 12-segment RGB mask with pixel mapping feature “eye-candy” effect macros to create spectacular visual animations without complex programming. Ultra-fast 16-bit pan/tilt movements with automatic position correction and a dedicated speed channel enable precise and smooth movements, perfect for dynamic shows and fast light chases.

Professional control and advanced operation.
The BTI-BLIZZARD WASH2 features a built-in wireless DMX receiver (W-DMX/CRMX compatible) and natively supports Art-Net™ and sACN for modern integration into professional control systems. The RGB pixels can be controlled via Art-Net™ or sACN, while movements remain controlled via DMX, offering total flexibility. With modes ranging from 26 to 133 DMX channels and RDM functionality for remote configuration, it integrates seamlessly into any stage environment. The ultra-smooth 24-bit dimmer offers fast and slow modes, with four curves (linear, square, inverted square, S-curve). The fast and precise 16-bit pan/tilt movements include position correction and a dedicated speed channel. The dot-matrix LCD screen makes menu navigation easy, while the NFC feature allows you to read error codes and information (via a dedicated app currently in development), making it perfect for rental companies.

IP65-rated durability and quiet operation.
With IP65 certification, the BTI-BLIZZARD WASH2 is weather-resistant (rain, dust) for uncompromising outdoor use. Its super-quiet fan mode makes it perfect for theatrical applications requiring total acoustic discretion. Maximum power consumption: 1000W. Professional connectivity: 5-pin XLR (DMX input/output), RJ45 (Art-Net/sACN input/output), powerCON TRUE1 compatible (power daisy-chain input/output). The DMX connectors can be easily converted to 3-pin XLR using the BT-XLR5TO3 COMBIKIT. Optional backup battery for off-grid operation. Comes with omega mounts for quick installation.

Technical Specifications:

• IP65 and silent operation: ideal for both indoor and outdoor use.
• RGBL light source with 19 x 50W LEDs.
• Use of LIME instead of white for a wider color palette and high CRI.
• Hi-CRI color temperature presets: 1800K to 10000K.
• Consistently high light output:
  • 52,000 lux @ 5m (3.8°)
  • 950 lux @ 5m (38°)
• Smooth 24-bit dimmer with fast and slow dimming modes.
• 4 gradation curves: linear, square, inverse square, S-curve.
• RGB halo ring with integrated eye-candy macros.
• RGB mask with 12-segment pixel control and built-in macros.
• Fast 16-bit pan/tilt movements with position correction and speed control.
• Ultra-quiet ventilation mode for theatrical applications.
• Control modes :
  • 26 to 133 DMX channels + RDM function for remote configuration.
  • Full compatibility with Art-Net™ and sACN.
  • Pixel control via Art-Net™ / sACN, movement via DMX.
• Integrated wireless DMX receiver (W-DMX / CRMX compatible).
• Matrix LCD display for intuitive navigation.
• NFC function: read errors and information (dedicated APP under development).
• Full connectivity :
  • 5-pin DMX inputs/outputs
  • RJ45 inputs/outputs
  • Compatible with powerCON TRUE1
• Easy conversion to 3-pin XLR with the BT-XLR5TO3 COMBIKIT kit.
• Optional backup battery: settings possible without power supply.
• Quick-fit with omega brackets included.