Opening the SPECTRABLAST up to the photo world.
The BTI-SPECTRABLAST BOWENS extends the BTI-SPECTRABLAST into a whole ecosystem of modifiers it couldn’t touch before: reflectors, softboxes, and any accessory built around the Bowens S-type mount, a standard widely used across photo and video production. One part turns an event blinder into a shapeable light source for a shoot or a film set.

A straightforward swap, with no compromise on weatherproofing.
The adapter bolts on in place of the fixture’s original front plate, secured with 4 screws, with no other modification needed. Full weatherproofing on the SPECTRABLAST is preserved despite the front plate swap, an important point for a fixture built to run both indoors and out.

Tool-free mounting.
Once the adapter is fitted, any accessory built around a Bowens mount clips straight on, no tools, no adjustment. Enough to go from an event rig to a studio setup in seconds.

Key features:

• Compatible with standard Bowens reflectors, softboxes and accessories
• Replaces the original front plate, secured with 4 screws
• Full SPECTRABLAST weatherproofing preserved
• Tool-free accessory mounting

Technical specifications:

• Brand: Briteq
• Compatible with: BTI-SPECTRABLAST
• Net weight: 0.18 kg

The CIRRUS benchmark is taking it to the next level.
The BTX-CIRRUS 3 succeeds the BTX-CIRRUS II with significant improvements across the three key areas that matter on tour: light output, movement speed, and native network integration. Nineteen 60 W RGBL LEDs replace the previous generation for superior performance, and the pan/tilt/zoom motors handle higher speeds without losing precision. Generous range of motion—540° pan and 210° tilt—ensures complete stage coverage with no blind spots.

A brightness that holds its own in broad daylight.
28,137 lux at 5 m in a narrow beam (4.6° field), up to 78,159 lux at 3 m. The zoom covers a beam angle of 4.5° to 45.9° (corresponding to a field of view of 6.2° to 59.4°), ranging from a precise spot to a wide wash with no break in rendering between the two extremes.

Full pixel mapping, with built-in shape effects.
Each LED is individually addressable: in addition to global RGBL control, a dedicated pixel mode (RGB on 57 channels or RGBL on 76 channels) allows you to control the 19 LEDs one by one, organized into three concentric zones (1 central zone, 2 rings of 6 and 12 LEDs). The “Shapes” mode adds preprogrammed shape effects with independent selection, speed, offset, and color settings for each ring, controllable directly via DMX without requiring a media server or external mapping software.

A library of calibrated colors.
More than 60 built-in color macros reproduce calibrated gel references (LEE/Rosco numbering system: Bastard Amber, Fire, Steel Blue, Congo Blue, etc.), supplemented by a linear CCT fade from 2700 K to 8000 K and a tungsten emulation (redshift/amber drift) that can be activated via DMX: the light gradually turns redder as the intensity decreases, just like a filament projector—a real asset for mixed LED/halogen installations in theater.

Three fan modes, one for each operating scenario.
Silent mode slightly reduces light output to ensure silent operation, designed for theaters and film sets. Auto mode continuously adjusts fan speed based on temperature, providing a standard balance between performance and quiet operation. Full mode maximizes cooling and brightness for festival stages where power takes precedence over quiet operation. The selection can be made via DMX or directly through the unit’s menu.

Native network connectivity. Built-in WDMX (
), compatible with CRMX as well as W-DMX G4S and G3, Art-Net, and sACN as standard: the BTX-CIRRUS 3 connects directly to an existing network infrastructure without an external converter, while retaining a standard 5-pin XLR DMX input/output for wired installations. Five DMX modes, ranging from 24 to 100 channels depending on the desired level of control (Standard, Shapes, Extended, Extended RGBL, Full).

RDM: Patch without taking out the ladder.
In addition to standard RDM addressing, the BTX-CIRRUS 3 allows you to remotely configure the starting DMX address, channel mode (personality), and pan/tilt reversal directly from the RDM console. This makes it possible to prepare and deploy the patch for an entire fleet of moving head lights without having to climb up to each unit individually.

Designed for use on tour.
2.8-inch color touchscreen with automatic display rotation, ensuring the screen is always oriented correctly regardless of the mounting position. Internal battery allows you to make adjustments without plugging the device into an outlet. The LED’s PWM frequency is adjustable (1,200 to 6,000 Hz) for flicker-free operation, ensuring that any risk of image flicker is eliminated during filming or video recording. Selectable dimming curves (linear, square, S-shaped) to tailor the fade effect to the desired result.

Connectors and Installation.
Seetronic 5-pin XLR inputs/outputs (convertible to 3-pin XLR via the optional BT-XLR5TO3 COMBIKIT ), compatible with Seetronic TRUE-1 power supply, with daisy-chain capability to simplify installation on a rig with multiple units. Omega brackets included for quick mounting. An optional 60 × 80 cm flight case, the MOVING HEAD CASE 4 Mk2, holds 2 units for transport. Firmware updates are possible via the optional FIRMWARE UPDATER 3 (part number B04389).

Key Features:

• 19 RGBL 60 W LEDs, output up to 78,159 lux at 3 m
• Pan 540° / tilt 210°, zoom 4.5°–45.9° (field of view 6.2°–59.4°)
• Full-pixel mapping (19 addressable LEDs), built-in ring-based shape effects
• More than 60 calibrated gel-type color macros, CCT 2700–8000 K, tungsten emulation (redshift/amber drift)
• 3 fan modes: Silent (theater), Auto, Full (festival)
• Integrated WDMX (CRMX, W-DMX G4S/G3), Art-Net, and sACN; RDM with remote configuration
• 5 DMX modes, from 24 to 100 channels
• 2.8-inch touchscreen with automatic rotation, built-in battery, adjustable flicker-free PWM (1200–6000 Hz)

Technical Specifications:

• Dimensions: 50.3 (H) × 36.4 × 29.3 cm
• Weight: 17.6 kg
• Power supply: AC 100–230 V, 50/60 Hz
• Fuse: 20 mm glass, 250 V, 20 A slow-blow
• Power consumption: 700 W
• Circuit rating: 10 A
• Wireless frequency band: 2402–2480 MHz
• Wireless Protocols: CRMX, WDMX G4S, and G3
• Color: black
• Display: 2.8-inch touchscreen
• Mounting: Omega bracket included
• Protection rating: IP20, for indoor use
• Operating temperature: 0 °C to +40 °C
• Control modes: fixed standalone, automatic standalone, manual, DMX
• Protocol: Art-Net, sACN, DMX, Wireless DMX, RDM
• DMX channels: 24 (Standard), 37 (Shapes), 81 (Extended), 94 (Full), 100 (Extended RGBL)
• Range of motion: pan 540°, tilt 210°
• Beam angle: 4.5° to 45.9° (field of view: 6.2° to 59.4°)
• Light source: 19 × 60 W RGBL LEDs
• Color temperature: 2,700 K to 8,000 K
• DMX Connections: 5-pin XLR, RDM-compatible, and BT-XLR5TO3 COMBIKIT

Package contents:

• BTX-CIRRUS 3
• 2 quick-lock omega brackets
• TRUE-1 powerCON Cable
• Safety Cable
• User Manual

Compatible accessories:

• BT-XLR5TO3 COMBIKIT: 5-pin to 3-pin XLR conversion kit
• FIRMWARE UPDATER 3 (code B04389): firmware update tool
• MOVING HEAD CASE 4 Mk2: 60 × 80 cm flight case for 2 units (optional)

Heavy smoke without the hassles of CO₂.
Three ultrasonic elements transform a mixture of smoke fluid and water into a large volume of heavy smoke, covering areas up to 500 m². No more expensive and hard-to-find CO₂ cylinders: the BT-H2FOG 3000 produces the same visual effect on the ground with much simpler logistics. Quiet operation, suitable for theaters, TV studios, and other environments with strict noise requirements.

Power and dual output designed for large areas.
The 3,000 W of ultrasonic power generates a large volume of smoke, which is necessary to effectively cover large areas without needing multiple machines. The dual output simplifies setup: rather than concentrating all the smoke output at a single point, the smoke can be distributed to two separate areas, ensuring even coverage and simplifying the placement of hoses on a set or a large stage.

A system designed for quick installation.
The two black hoses are installed using a quick-release clip system, which significantly reduces setup time. The included nozzles ensure better smoke distribution on the ground. The ABS water tank eliminates any risk of rust over time, unlike traditional metal tanks.

Precise control over the effect.
Adjustable smoke output and fan speed, either via 2 DMX channels or directly from the built-in control panel with LCD screen and timer. Liquid and water level protection to prevent dry running. Wireless DMX compatible: simply plug in the optional WTR-DMX DONGLE to eliminate the need for wiring.

Connectivity and transport.
3- and 5-pin powerCON TRUE1 and DMX connectors for both input and output. Sturdy ABS case mounted on 4 soft rubber casters with brakes, for easy movement both in a studio setup and on tour. The hoses and nozzles stow away in the machine’s own compartment.

Key Features:

• Ultrasonic heavy smoke, coverage up to 500 m²
• 3,000 W power, dual output for even distribution over a large area
• Operates using water and smoke fluid, without CO₂
• 2 DMX channels, LCD control panel with built-in timer
• Rust-resistant ABS water tank, quick-connect hoses
• Liquid and Water Level Protections
• Wireless DMX-compatible (optional WTR-DMX DONGLE)
• ABS flight case on wheels with brakes
• Hoses and nozzles stored in the machine’s own compartment

Technical Specifications:

• Dimensions: 69 × 46.5 × 56.2 cm (including casters)
• Weight: 33 kg
• Power supply: 240 V AC, 50 Hz
• Power consumption: 2,500 W
• Color: black
• Display: LCD
• Protection rating: for indoor use
• Control modes: fixed standalone, standalone with timer, manual, DMX
• DMX channels: 2 maximum
• Fluid flow rate: 1 to 95 ml/min
• Liquid type: smoke-generating (recommended liquid: BT-FOGLIQ5 LOW2)
• Tank capacity: 2.8 L (smoke fluid) + 28 L (water)
• Input connections: 3-pin and 5-pin XLR, optional wireless DMX, powerCON TRUE1 or compatible
• Output connections: 3-pin and 5-pin XLR, optional wireless DMX

Compatible accessories:

• BT-FOGLIQ5 LOW2: Smoke fluid recommended for optimal results
• WTR-DMX DONGLE: wireless DMX dongle (sold separately)

A compact all-in-one solution.
The BT-PROFILE 6C10 combines in a lightweight, rugged housing what previously required two separate projectors: high-quality white light, a wide color gamut, and high brightness—all in a compact design ideal for installations where space is at a premium.

A precision optical system for a cutting projector.
The 6C10 features a fixed optical unit with variable focus and a continuous zoom range from 25° to 50°. The 4-blade system, positioned at the focal plane, allows for sharp beam edges and precise framing of the illuminated area: enough to outline a stage, isolate a subject, or mask a set element without relying on a camera operator or external shutters. A compatible gobo holder (BT-PROFILE HD/WW GOBO HOLDER, sold separately) completes the setup for projecting patterns.

Perfect white, rich colors.
Based on a 6-color RGBALC LED cluster (red, green, blue, amber, lime, cyan), the BT-PROFILE 6C10 delivers white light with a CRI greater than 95 and color temperature presets, along with a selection of preset colors. Thanks to the CCS (CCS Color Calibration System), color variations between batches are eliminated, with the same color temperature presets (1,800 K to 10,000 K) and the 48 calibrated color presets (LEE® / ROSCO® numbering) as the BT-THEATRE HD2, ensuring perfect consistency between the two projectors in the same installation.

Standalone or DMX-controlled.
The BT-PROFILE 6C10 operates in fully standalone mode without DMX—useful for museums or exhibition booths—or via DMX with 8 different channel modes to suit your control needs. The RDM function simplifies remote addressing and configuration. In the event of a DMX outage, a choice between “blackout” and “freeze” prevents unexpected issues during a performance.

User-friendly operation.
Quiet cooling with multiple noise presets (live, studio, etc.), adjustable LED refresh rate for flicker-free video recordings, manual control of dimmer, colors, temperature, and zoom, and a lock function to prevent accidental changes. A rear-panel OLED display provides access to a comprehensive configuration menu, allowing you to adjust DMX addressing, channel mode, or presets without using an external controller.

Connectivity.
DMX inputs/outputs via 5-pin XLR connectors and power inputs/outputs via powerCON TRUE1 or compatible connectors, for easy daisy-chaining of multiple devices.

Key Features:

• RGBALC 6-Color LED Cluster, 200 W
• IRC White > 95, temperature presets 1,800 – 10,000 K
• 48 calibrated color presets (LEE® / ROSCO® numbering), compatible with BT-THEATRE HD2
• Built-in manual zoom 25°–50°, 4-blade cutting system
• Standalone or DMX operation (8 channel modes), RDM
• OLED display, settings lock, blackout or freeze mode when DMX is interrupted

Technical Specifications:

• Dimensions: 56.8 × 19.1 × 22.4 cm
• Weight: 6.2 kg
• Power Supply: AC 100–240 V, 50/60 Hz
• Power consumption: 200 W
• Color: black
• Display: OLED
• Mounting: standard clamp (optional)
• Protection rating: for indoor use
• Control modes: fixed standalone, automatic standalone, manual, DMX
• Protocol: DMX, RDM
• DMX channels: 1 through 19, depending on the mode
• Maximum luminous flux: 5,360 lm
• Illuminance: 1,377 lux at 5 m (23.3° beam angle)
• Color temperature: 1,800 K to 10,000 K
• IRC: 95
• Colors: white, RGBALC (red, green, blue, amber, lime, cyan)
• Features: manual focus, manual zoom
• Zoom range: 23.3° to 52.2°
• Max refresh rate: 25 kHz
• Input/output connections: 5-pin XLR, powerCON TRUE1, or compatible

Behaves just like a halogen blinder.
The BTI-SPECTRABLAST is a 380 W full color LED audience blinder built around an emulated redshift / amber drift effect: as the intensity dims, the light warms and reddens progressively, exactly the way an incandescent filament does at the tail end of a fade. That detail, invisible on a spec sheet but instantly recognizable to the eye, is what separates a convincing LED blinder from one that stays flat and “artificial” at every intensity. The SPECTRABLAST reproduces this behavior natively, with no complex setup, so it drops into a mixed LED/halogen rig without any visual mismatch. The effect stays optional: it can be switched off to keep a stable, neutral white even at the lowest levels, whenever the halogen look isn’t what you’re after.

A housing built for indoors and out.
The SPECTRABLAST sits in a rugged die-cast aluminum housing. Its IP65 rating means it’s safe for outdoor use, exposed to the weather, while working just as well on an indoor rig: the same fixture covers both, with no separate version to manage depending on where it’s installed. powerCON TRUE1-compatible in/out, weatherproof 5-pin XLR in/out, convertible to 3-pin XLR with the optional BT-XLR5TO3 KIT. Built-in universal 100-240 V, 50/60 Hz power supply. The PROJECTOR CASE 9, a 120 × 60 cm flight case for ten fixtures, is available as an option for transport.

Modular rigging built for creativity.
BTI-BLINDER1 SPLICE CONNECTOR units let multiple blinders be mechanically assembled into lines, circles, squares, or any other layout your imagination comes up with. BTI-BLINDER1 CLAMP CONNECTOR units mount those assemblies straight onto truss. The optional OMEGA BRACKET SMALL offers a conventional hanging mount. The optional BTI-SPECTRABLAST BOWENS adapter opens up a whole range of photographic reflectors and modifiers for even more creative freedom. The SPECTRABLAST uses the same SPLICE and CLAMP connectors as the BTI-BLINDER1 FX: the two models mix freely on the same rig.

A rich RGBALC color engine.
The 380 W RGBALC LED engine delivers excellent CRI, with the redshift / amber drift effect described above available at all times and independent control over every color. CCT presets from 1500 K to 8500 K, covering everything from a strongly warm white to a neutral one.

Full control, no extra hardware required.
5 DMX modes, both 8-bit and 16-bit, from 1 to 12 channels depending on the level of detail needed. A dedicated control channel lets you remotely drive the “red shift” effect, dimmer speed and curve, pixel order, and more. RDM gives access to channel mode, DMX addressing and temperature monitoring. OLED display with touch buttons for straightforward setup. No dedicated controller needed: the system runs fully standalone, with easy daisy-chaining across multiple units.

Key features:

• 380 W RGBALC LED audience blinder, IP65, indoor/outdoor rated
• Emulated redshift / amber drift, switchable, faithfully mimics a halogen blinder
• Rugged die-cast aluminum housing
• Modular rigging via SPLICE and CLAMP connectors, compatible with the BTI-BLINDER1 FX
• CCT presets 1500-8500 K
• 5 DMX modes (8/16-bit), 1 to 12 channels, RDM
• Touch-button OLED display, fully standalone operation
• Built-in universal 100-240 V power supply

Technical specifications:

• Dimensions: 23.2 × 29.3 × 16.2 cm
• Weight: 4.8 kg
• Power input: AC 100-240 V, 50/60 Hz
• Power consumption: 230 W
• Color: black
• Display: OLED
• Fixation: optional omega bracket
• IP rating: outdoor (IP65)
• Control modes: standalone fixed, standalone automatic, manual, DMX
• Protocol: DMX, RDM
• Software: not programmable, upgradable
• DMX channels: 1 to 12
• Max luminous flux: 9780 lm
• Illuminance: 329 lux @ 5 m (62° beam, standard optics)
• Color temperature: 1500 K to 8500 K
• CRI: 90
• Colors: RGBALC (red, green, blue, amber, lime, cyan), color mixing
• Connections in: 5-pin XLR, optional 3-pin XLR, RDM, powerCON TRUE1 or compatible
• Connections out: 5-pin XLR, optional 3-pin XLR, powerCON TRUE1 or compatible

Compatible accessories:

• BTI-BLINDER1 SPLICE CONNECTOR: mechanical assembly connector
• BTI-BLINDER1 CLAMP CONNECTOR: truss mounting connector
• BTI-SPECTRABLAST BOWENS: adapter for photographic reflectors and modifiers
• OMEGA BRACKET SMALL: omega bracket (optional)
• BT-XLR5TO3 KIT: 5-pin to 3-pin XLR conversion kit
• PROJECTOR CASE 9: 120 × 60 cm flight case for ten units (optional)

A versatile floodlight for indoor and outdoor use.
The BTI-VERSABEAM is a compact, IP65-rated floodlight that is equally at home in indoor installations and outdoor use. Seven 15-W RGBL LEDs deliver a narrow 12° beam (2,430 lux at 5 m), which can be widened to 26° using the included frost filter: a single fixture for two lighting modes, from a precise beam to broader illumination.

Four ways to control it.
The VERSABEAM adapts to any setup: standalone (custom colors, color and temperature presets, or automatic changes), wired or wireless DMX with 4 channel modes (3-channel HSV, 4-channel RGBL, 4-channel LEDCON02, 8-channel STAGE for extended control), in master/slave mode to synchronize multiple units without DMX (wireless connection or XLR cabling), or with the infrared remote control, including in master/slave mode. The built-in wireless transceiver is compatible with the W-DMX G4S protocol.

Intuitive controls, silent cooling.
The graphical OLED display shows essential information, including wireless DMX signal strength, with touch-sensitive button navigation. Cooling is entirely passive, with no fan: no operating noise—a real advantage for indoor installations where silence is key, including in the theater world, where the absence of background noise is often a requirement in the specifications.

Connectivity and Mounting.
Dual bracket compatible with structural clamps or optional omega brackets. powerCON TRUE1 AC input/output for easy daisy-chaining; waterproof 5-pin XLR input/output connectors, convertible to 3-pin XLR using the optional BT-XLR5TO3 KIT.

Compatible with the BTI-AKKUBEAMER series.
The BTI-VERSABEAM shares the same DMX compatibility and colorimetry as the BTI-AKKUBEAMER, allowing them to be combined in the same installation without any difference in color rendering between the units. A 120 × 60 cm flight case for 10 projectors is available as an option for transport.

Key Features:

• 7 RGBL LEDs, 15 W, IP65, for indoor and outdoor use
• 12° beam (2,430 lux at 5 m), 26° frost filter included
• 4 modes: standalone, wired/wireless DMX, master/slave, IR remote control
• Built-in Wireless DMX, W-DMX G4S protocol
• Passive cooling, quiet operation
• OLED screen, touch buttons
• Compatible and mixable with the BTI-AKKUBEAMER

Technical Specifications:

• Dimensions: 17 × 23.4 × 27.9 cm
• Weight: 4.2 kg
• Power Supply: AC 100–240 V, 50/60 Hz
• Power consumption: 72 W
• Color: black
• Display: OLED
• Mounting: optional omega bracket
• Protection rating: for outdoor use (IP65)
• Control modes: fixed standalone, automatic standalone, remote control, manual, DMX, master/slave
• Protocol: DMX, Wireless DMX, RDM
• Software: not programmable, can be updated
• DMX channels: 3 to 8, depending on the mode
• Illuminance: 2,430 lux at 5 m (12° beam angle)
• Color temperature: 2,500 K to 6,000 K
• Colors: RGBL, color mixing
• Features: Includes 1 frost filter
• Beam angle: 12° to 26°
• Maximum refresh rate: 7 kHz
• Input/output connections: 5-pin XLR, wireless DMX, RDM, powerCON TRUE1 or compatible

Compatible accessories:

• BT-XLR5TO3 KIT: 5-pin to 3-pin XLR conversion kit
• Omega bracket or structural clamp (optional, for the double bracket)
• IR-4 REMOTE: Infrared remote control (optional)
• 120 × 60 cm flight case for 10 units (optional)

Unparalleled smoke output.
With its 2,200 W and large internal turbine, the BT-TOURFAZER propels up to 566 m³ of smoke per minute, delivering powerful yet quiet dispersion that envelops even the largest stages in a light, even veil of smoke. The adjustable air deflector allows you to precisely adjust the direction of the smoke output to suit the show’s needs. Fan speed and smoke volume are independently adjustable, providing total control over the effect.

Full control, wired or wireless.
The BT-TOURFAZER offers three operating modes: standalone in continuous volume mode, standalone in timer mode with configurable intervals and durations, or DMX-controlled via its 3- and 5-pin XLR connectors. Built-in support for wireless DMX is included—simply connect an optional WTR-DMX dongle to free your setup from any DMX cabling constraints. The LCD display and its four buttons allow you to access all settings directly on the unit.

Designed for the road.
The BT-TOURFAZER comes in its own flight case with removable lids featuring Penn-Elcom^® butterfly latches, a safety strap for the liquid container, and lockable wheels for secure transport both on stage and in the truck. The 5-liter BT-FOGLIQ5 PRO2 fog fluid container is recommended for optimal performance—a water-based formula that leaves no oily residue, is odorless, non-toxic, and non-flammable, ensuring worry-free use.

Technical Specifications:

• Power Supply: AC 220–240 V, 50/60 Hz
• Power: 2200 W
• Fuse: 15 A
• Smoke Flow Rate: 566 m³/min (20,000 ft³/min)
• Warm-up time: 4.5 minutes
• Tank capacity: 5 liters
• Fluid consumption: 1–42 ml/min
• Recommended fluid: BT-FOGLIQ5 PRO2
• DMX channels: 2
• Connectors: 3-pin + 5-pin DMX XLR, powerCON TRUE1
• Wireless DMX: optional WTR-DMX dongle
• Dimensions: 660 × 300 × 610 mm
• Weight: 34 kg

Power and Rich Color. Reproduction
With its standard 17° beam angle, the BTI-FLATPAR12 delivers over 2,050 lux at 5 meters and exceeds 6,000 lumens, providing a crisp and striking light output even in the most demanding environments. Its five-channel RGBAL palette offers remarkably rich and precise color reproduction, enhanced by a dedicated UV channel for special effects.

Maximum flexibility, total control.
The BTI-FLATPAR12 adapts to any setup thanks to three operating modes. In standalone mode, it offers custom colors, color and CCT presets, or automatic color changes. In master/slave mode, one unit controls the others wirelessly or via XLR cabling for coordinated lighting shows. Finally, in DMX mode—whether wired or wireless—five modes ranging from 2 to 12 channels allow for channel-by-channel custom programming. The built-in wireless receiver/transmitter is 100% compatible with the G4S W-DMX protocol.

Professional Connectivity and Field Ergonomics.
The BTI-FLATPAR12 is equipped with Seetronic power inputs and outputs compatible with powerCON TRUE1 for easy daisy-chaining, as well as waterproof 5-pin XLR connectors that can be converted to 3-pin XLR using the optional BT-XLR5TO3 COMBIKIT. The graphical OLED display with touch-sensitive buttons ensures intuitive navigation through the configuration menus, while the two silent fans maintain optimal thermal stability under all conditions.

Technical specifications:

• Robust flat floodlight for outdoor use with IP65 protection, featuring 12 x 20 W RGBAL+UV LEDs with 17° beam angle, luminous intensity of 2,494 lux at 5 m and luminous flux in excess of 6,000 lm.
• Includes a wireless transceiver fully compatible with the W-DMX G4S protocol for reliable remote control
• Smooth RGBAL color changes with an additional UV channel for special lighting effects
• Several operating modes for great flexibility: stand-alone with custom colors, color presets and CCT or automatic color changes
• Master/slave mode allows the master to control slaves wirelessly or via XLR cabling, facilitating the creation of complex lighting scenarios
• Wired and wireless DMX control with 5 modes available: 2 channels (master + color/CCT), 3 channels (HSV), 7 channels (separate colors + master), 10 channels (separate colors + master + strobe + color/CCT presets + control channel) and 12 channels (10-channel mode with color sets).
• Graphic OLED display with touch-sensitive buttons for intuitive configuration menu navigation
• Quiet, efficient cooling provided by two integrated fans
• Sturdy, versatile mounting bracket for floor mounting thanks to its width, or for structure mounting using M10/M12 hooks or omega brackets.
• powerCON TRUE1 input and output compatible with Seetronic connectors for simplified series connection
• Weatherproof 5-pin XLR input and output connectors can be converted to 3-pin XLR using the optional “BT-XLR5TO3 COMBIKIT” conversion kit.

BTI-FLATPAR12 · IP65 flat floodlight

Built for every situation.

12 × 20 W RGBAL+UV LEDs, 17° beam, over 6,000 lm, built-in W-DMX G4S wireless DMX, OLED touch display.

Learn more →

The BTI-RAPTOR is a strobe light with a 220° motorized tilt and an IP65 rating, combining a central row of 144 white LEDs spread across 8 sections and 576 RGB LEDs in 16 zones, for stage effects of formidable power and precision.

A strobe light designed for the stage.

Designed to meet the most demanding requirements of live entertainment, the BTI-RAPTOR is ideal for concert venues, nightclubs, and rental companies alike. Its fast, 220° motorized tilt offers complete positioning freedom and can be controlled remotely, while its IP65 rating ensures worry-free outdoor use, regardless of the conditions.

A dual-lighting architecture.

The BTI-RAPTOR articulates two complementary sources: a central strobe line made up of 144 x 5 W CW LEDs distributed over 8 independent sections, and 16 RGB zones made up of 576 LEDs offering an unlimited chromatic palette in 2 x 8 sections. The electronic FROST effect with linear control allows you to switch from a precise beam to a soft diffusion in real time.

Full control and quick programming.

DMX (RDM) and Art-Net™ compatible, the BTI-RAPTOR offers 5 control modes from 10 to 80 channels, with 5-pin XLR DMX input/output. Its numerous internal 2-layer effects sequences enable rapid implementation without a console, for intuitive programming even in the most complex configurations.

Installation and transportation designed for professionals.

High-efficiency fan cooling ensures thermal stability even during extended use. Vertical or horizontal mounting is possible thanks to the omega brackets supplied, adapting to the constraints of each location. A dedicated flight case (80 x 60 cm) for up to 4 BTI-RAPTORs and accessories is available as an option, to facilitate transport and equipment management.

Technical specifications :

• Tilting stroboscope designed for outdoor use with IP65 protection for robustness and durability
• Illuminated panel combining a central white strobe line with 144 x 5 W CW LEDs in 8 sections
• Second zone with 16 RGB sections totalling 576 RGB LEDs in 2 x 8 zones
• Integrated electronic FROST effect with linear control for modulating effect intensity
• Numerous two-layer internal effects sequences for fast, varied programming
• Efficient fan cooling for good heat dissipation
• Fast TILT movements with a range of 220 degrees for great positioning flexibility
• DMX control with RDM protocol and Art-Net™ compatibility offering 5 DMX modes from 10 to 80 channels depending on requirements
• DMX input and output connectors via XLR 5-pin, with possibility of conversion to XLR 3-pin with BT-XLR5TO3 KIT available
• Can be mounted vertically or horizontally using the omega brackets supplied with the product
• Dedicated flight case (80 x 60 cm) for up to 4 BTI-RAPTOR units and associated accessories

Four strobes and their accessories, one flight case.
The PROJECTOR CASE 7 is sized to hold four full BTI-RAPTOR units without having to sort through or squeeze in their accessories. A separate dedicated compartment holds truss mounting hooks, cables and all the small parts that travel with the fixtures, so the whole kit leaves in one flight case rather than spread across several.

Built for the road.
9 mm plywood construction with a durable black HEXA finish, reinforced corners for added protection against repeated handling knocks. This flight case delivers optimal protection thanks to its interior foam, specifically shaped to cushion the contents on every trip.

Handling and transport.
Two recessed folding handles on each short side, and two more on each long side: four grip points in total, for flexible one- or two-person carrying depending on the setup. Four 100 mm soft rubber swivel castors with self-aligning wheels, two with brakes for better standstill stability. Secure closure with heavy-duty butterfly latches. A recessed panel on the lid is built for labeling, handy for telling this flight case apart from others of the same size in a stack.

A format built to fit existing logistics.
Standard truck-pack dimensions, 80 × 60 × 40 cm, 55 cm tall overall including castors. This flight case stacks with other cases of the same format, saving space both in transit and in storage.

Key features:

• Stackable flight case, built for 4× BTI-RAPTOR units and their accessories
• Dedicated compartment for mounting hooks, cables and small parts
• 9 mm plywood, black HEXA finish, reinforced corners
• 4 recessed folding handles (2 short sides, 2 long sides)
• 4 × 100 mm swivel castors, 2 with brakes
• Butterfly latches, recessed panel for labeling
• Standard truck-pack dimensions (80 × 60 cm)

Technical specifications:

• Brand: JV Case
• Capacity: 4× BTI-RAPTOR and accessories
• Material: 9 mm plywood, black HEXA finish
• Corners: reinforced
• Handles: 4 recessed folding
• Castors: 4 × 100 mm soft rubber swivel, self-aligning, 2 with brakes
• Latches: butterfly latches
• Interior protection: shaped foam
• Dimensions: 80 × 60 × 40 cm, 55 cm total height (including castors)
• Total weight: 32 kg