DMS-283 RDM
DMX mixer, splitter and booster with RDM support. Ensures 100% electrical isolation between the 2 inputs and 8 outputs for optimum protection of your installation. Equipped with 3-pin XLR connectors.
439,00 € inc. VAT
- This DMX mixer + splitter + booster with RDM support is the ideal all-in-one solution for securing your DMX installations: 100% electrical isolation between all inputs and outputs.
- 2 DMX inputs + 8 DMX outputs, all with 3-pin XLR connectors
- Different port operating modes allow the 2 DMX signals (inputs A and B) to be combined in different ways:
- HTP: the higher value of two identical channels has priority
- LTP: the last modified value of two identical channels has priority
- Backup: if the DMX signal on input A fails, the signal on input B immediately takes over.
- A: outputs 1 to 4 / B: outputs 5 to 8: the DMX signal from input A is sent to outputs 1 to 4, that from input B to outputs 5 to 8.
- The splitter function distributes the DMX signal(s) from inputs A and/or B to 8 identical outputs.
- Total electrical isolation: all inputs and outputs are 100% electrically isolated from each other – a problem with one input or output will not affect the others.
- RDM filtering: the RDM function can be filtered on both inputs to prevent unexpected behavior by DMX equipment.
- DMX output frequency is adjustable from 20 Hz (slow) to 40 Hz (fast) to increase compatibility between fast DMX controllers and slow DMX devices.
- Configurable output behaviour in the event of simultaneous loss of both DMX inputs :
- No DMX: no DMX signal on outputs
- HOLD: the last DMX values are retained
- ZERO: all DMX output values are set to zero
- Easy setup thanks to graphic OLED display
Specification: DMS-283 RDM
|
