DZ-CTL2OUT

Pump up the volume.

The control box allows you to select a source and adjust its volume on a preselected output. As for its display, it allows you to choose the channel you want to select and then adjust its volume.
The control unit connects to digital channels 9/10 and 11/12 of the matrix*.

DZ-CTL2OUT has 2 balanced analog outputs on a terminal block at the rear, for connecting an amplified system for example.

The DZ-MATRIX Setting Software allows you to :

• The device name can be changed using the DZ-MATRIX setting software
• The software allows you to control access to sources and outputs in order to limit the settings available to the end user
• Password lock and adjustable screen saver

*Use CAT5e or CAT6 cable up to 100 m long.

Characteristic :

2 analog outputs.
Balanced
• Connectors: 2 3-pin terminal blocks, 5 mm pitch
• Impedance: 240 Ohms
• Maximum output power: +20 dBu
• Frequency response at 0 dB: 20 Hz ~ 20 kHz ± 1.5 dB
• Dynamic range: -107 dB max., A-weighted
• Crossover distortion: -87 dB max., A-weighted

LCD display.
– Volume control: -∞ ~ +15 dB

Ports.
– Network RD to DZ-MATRIX, RJ45, 100 m maximum of CAT 5E cable (or higher)

Dimensions.
– W x H x D: 147 x 86 x 47 mm

Improvements made.

DZ-MATRIX:

• Copy of the DSP settings for linked stereo inputs and outputs
• Added a “Clear All” option to the matrix module and enabled one-click matrix creation
• Saving and Loading EQ Presets on the Outputs
• Adding groups (4 for inputs and 4 for outputs)
• Option to select a default preset when the display is turned on
• Configuring the IP Address (DHCP or Static IP)

DZ-PAD:

• Added “VOL-” and “VOL+” buttons to the OUTPUT page
• Add the group page