MYOS10A

An active speaker built to cover more room without the bulk.
The MYOS10A is a 2-way active speaker in a 10″ format, built for mid-sized rooms, bars, conference spaces, or any event that calls for real headroom, all in a cabinet that stays easy to carry and set up. Its 51° x 74° dispersion covers a wide listening area from a single point source, while its asymmetric shape makes it just as much at home on a pole as it is on the floor as a stage monitor. With a total amplification of 700 W RMS, it delivers up to 126 dB of sound pressure.

Class D amplification, bi-amplified for efficiency.
The MYOS10A is bi-amplified in Class D: 350 W RMS for the low-frequency driver and 350 W RMS for the compression driver. Total power reaches 700 W RMS (1400 W peak), with a frequency response of 60 Hz – 20 kHz and a crossover point set at 1.6 kHz.

A reinforced cabinet, built with stage monitor use in mind.
The enclosure is built from reinforced 15 mm plywood, a material chosen in professional audio for its rigidity and its ability to damp unwanted resonance, keeping the sound clean under sustained use. Its asymmetric shape is a deliberate design choice: set flat, the cabinet acts as a stage monitor angled toward the performer; set upright, it becomes a compact PA speaker. Its horn rotates 90° to preserve dispersion when the speaker is laid on its side. Twelve M8 inserts and dual 36 mm pole sockets (0° / 7.5°) cover both fixed installation and mobile setups, a metal side handle makes it easy to carry, an integral metal grille and textured polyurea finish protect the cabinet, and four rubber feet keep it stable on the ground.

Easy installation with an optional wall-mount bracket.
Paired with the optional MYOS10sup wall-mount yoke, the MYOS10A moves just as easily into a fixed installation as it does on tour. The bracket is designed for horizontal mounting only, with 8 tilt positions from 0° to 56° in 8° increments, letting the aim be set precisely once the speaker is up, ideal for bars, restaurants, shops, or any venue where the speaker needs to disappear into the room on a permanent basis.

A natural pairing with subwoofers from the MYOS range.
Paired with a MYOS15ASub or MYOS18ASub subwoofer, the MYOS10A forms a compact system that covers the full spectrum, from deep bass through to the top end. The MYOS10A’s adjustable high-pass filter (80, 100 or 120 Hz) and the subwoofer’s own X-OVER setting (60/80/100/120/150 Hz) are set to the same value for a seamless handover between the two units. The subwoofer features a top-mounted 36 mm socket for a coupling pole, letting the MYOS10A sit right above it on a single point on the floor, a setup that’s quick to deploy for outstanding sound performance.

A complete DSP to adapt to every context.
The onboard DSP is controlled directly from the rear-panel display and push-rotary knob, no app or Bluetooth needed. The Mode menu offers 4 preset EQ curves (Normal, Live, Club, Speech) to match the sound to the context, while Location corrects the response for how the speaker is positioned: pole-mounted, as a stage monitor, or wall-mounted. Bass and treble each adjust independently from -10 dB to +10 dB, an adjustable high-pass filter (80, 100 or 120 Hz, or off) tunes the MYOS10A to work alongside a paired subwoofer, and the front LED can be set off, solid blue, or blue switching to red when the limiter kicks in. A Reset function restores factory settings in one step.

Connectivity.
One MIC/LINE input on a combo XLR/jack connector with a LINE/MIC switch, one XLR line output with a LINK/MIX switch to pass the signal on to another speaker or a subwoofer. Switch-mode power supply, 220-240V AC 50Hz.

Key features:

• Compact 2-way active speaker, 10″ driver + compression driver
• 700 W RMS bi-amplified in Class D, up to 126 dB SPL
• 90° rotatable horn to preserve dispersion in horizontal use
• Asymmetric cabinet: PA speaker or stage monitor in one enclosure
• Compatible with the MYOS10sup wall-mount yoke (optional)
• Full onboard DSP: Mode / Location / Treble / Bass / HPF / LED / Reset

Technical specifications:

• Configuration: 2-way active
• Low-frequency driver: 10″, 2″ voice coil, 40 Oz magnet, 4 Ohms, 350W AES
• High-frequency driver: 1.35″ compression driver, 8 Ohms, 50W AES
• Amplification: 350W RMS Class D (LF) + 350W RMS Class D (HF)
• Total power: 700 W RMS / 1400 W peak
• Maximum SPL: 126 dB
• Frequency response: 60 Hz – 20 kHz
• Crossover frequency: 1.6 kHz
• Dispersion: 51° x 74° (10 kHz), 90° rotatable horn
• Power supply: 220-240V AC 50Hz switch-mode (SMPS)
• Enclosure: reinforced 15 mm plywood, asymmetric shape with cut corners for monitor position
• Finish: textured anti-scratch polyurea paint
• Grille: integral metal
• Indicator: front-panel Power/Clip LED
• Mounting: 12 x M8 inserts, dual 36 mm pole sockets (0° / 7.5°), 4 rubber feet, metal side handle
• Optional accessory: MYOS10sup wall-mount yoke (horizontal, 8 tilt positions from 0° to 56°)
• Input: combo XLR/jack (MIC/LINE)
• Output: XLR with LINK/MIX switch
• Dimensions (H x W x D): 560 x 309 x 305 mm
• Net weight: 16 kg