PACK-INTRUDER-4

An all-in-one, ready-to-go package.
The PACK-INTRUDER-4 includes four INTRUDER wash moving heads, four FAST CLAMP Black V2 mounting hooks, and a stackable MOVING HEAD CASE 9 flight case, complete with omega brackets and M12 screws for assembly. A complete and cohesive setup, designed to equip a show and be quickly deployed on site.

A compact yet powerful wash fixture.
Each INTRUDER features 7 40-W RGBW LEDs, powered at 30 W to optimize their lifespan, for a total power output of 210 W. DMX-controlled motorized zoom from 5° to 50°, with an illuminance of 6,554 lux at 5 meters in the narrowest position (5°), for a beam that travels far without spreading. Ultra-fast pan/tilt movements, designed for professional applications where precision and responsiveness matter just as much as raw power.

Quiet operation, even at full load.
The INTRUDER’s thermal management has been optimized to ensure quiet operation even at full power—a feature that is particularly important for indoor performances, conferences, or any setting where the fan noise of a conventional projector would be distracting. Precise dimming from 0 to 100% and strobe effects available, for atmospheres ranging from soft to striking. IP20 rating: for indoor use only, limited to covered rooms and stages.

Three ways to control the show.
DMX control over 7, 11, 16, or 21 channels depending on the desired level of precision; standalone mode (automatic or sound-activated via internal microphone); or master/slave mode to synchronize multiple moving heads without DMX. Color LCD screen for navigating menus, 3-pin XLR connectors for DMX input/output, and powerCON-compatible daisy-chain power supply. Compatible with wireless DMX via Wireless Solution’s W-DMX protocol (G4 standard): simply plug in the optional Briteq WTR-DMX dongle—no additional hardware is required on the moving head side.

A flight case designed for the road.
The MOVING HEAD CASE 9 holds the four INTRUDER units in travel configuration, made of 9 mm plywood with a black HEXA finish and protective foam lining. It features a separate compartment for storing hooks and cables, four recessed handles, two butterfly latches, and is designed to accommodate optional 100-mm swivel casters. Stackable with other flight cases in the same series to optimize space in the truck.

Key Features:

• 4 INTRUDER wash fixtures, 7 × 40 W RGBW (210 W total), DMX zoom 5°–50°
• Quiet operation, optimized thermal management, IP20
• 4 FAST CLAMP Black V2 Hooks
• 1 stackable MOVING HEAD CASE 9 flight case
• Omega brackets and M12 screws included
• 3 control modes: DMX, standalone, master/slave
• Wireless DMX-compatible (W-DMX G4 protocol, optional WTR-DMX dongle)

Technical Specifications — INTRUDER wash fixture (× 4):

• LEDs: 7 × RGBW 40 W (powered at 30 W)
• Total power: 210 W
• Zoom: Motorized DMX, 5° to 50°
• Illuminance: 6,554 lux at 5 m (5° beam angle)
• Dimming: 0–100%, strobe effects
• Protection class: IP20
• Performance: Quiet even at full power
• DMX channels: 7, 11, 16, or 21, depending on the mode
• Modes: DMX, standalone (auto/sound), master/slave
• Display: Color LCD
• DMX Connections: 3-pin XLR, input/output
• Power: powerCON input/output
• Wireless DMX: compatible with the W-DMX protocol (Wireless Solution, G4 standard); optional WTR-DMX dongle
• Installation: Omega bracket included

Technical Specifications — MOVING HEAD CASE 9 Flight Case:

• Capacity: 4 units (INTRUDER, EXPLORER SPOT, or BT-VERTIGO)
• Material: 9 mm plywood, black HEXA finish
• Interior padding: soft foam
• Storage: separate compartment for hooks and cables
• Handles: 4 recessed
• Closures: 2 butterfly closures
• Casters: Mounting holes designed for 100 mm swivel casters (optional)
• External dimensions (W × D × H): 635 × 600 × 513 mm

Pack contents:

• 4 INTRUDER wash lights
• 4 FAST CLAMP Black V2 Hooks
• 1 MOVING HEAD CASE 9 flight case
• Omega brackets and M12 screws