WBS-200

• Wireless UHF microphone system including the WBP-200 beltpack and a tie microphone.
• The belt case can be used with rechargeable batteries!
• The beltpack input has a line/mic switch. It can also be used as a belt case for a guitar!
• Diversity reception for better stability: this avoids signal drops.
• Adjustable squelch setting to ensure stable reception free of unwanted noise.
• Mute tone to improve reliability.
• 16 frequencies can be selected via the PLL synthesizer, and up to 6 sets can be used at the same time.
• Antennas are present on the front panel, making it easy to mount in a rack.
• Optional 19″ RP-WMIC adapters available for mounting in a 1 or 2 receiver rack.
• XLR (balanced) and jack (unbalanced) outputs.
• Frequency response: 823-832/863-865MHz (in free use in most European countries)

Receiver

• Carrier Frequency Range: UHF band 823-832/863-865MHz
• Frequency Stability: ±0.005%.
• Receiving Sensitivity: @ 5μV S/N ratio >80dB
• Image and Spurious Rejection: 80 dB minimum
• Selectivity: ＞50dB
• Modulation Mode: FM
• Receiver type: PLL synthesized, switching diversity
• IF Frequency:^1st: 243.95MHz ~^2nd: 10.7MHz
• Tone Signal: 32,768KHz
• S/N ratio: ＞94dB, @ 20kHz deviation & 60mV antenna input
• AF Response: 80Hz to 15kHz (±3dB)
• T.H.D.: Less than 1,0% (at 1kHz)
• Power Supply: DC 12V ~ 18V
• Audio Output: Balanced & unbalanced outputs (Mic.= -20dB / Line = 0dB)
• Current consumption: 130mA +/-10mA

Belt pack Transmitter

• Carrier Frequency Range: UHF band 823-832/863-865MHz
• RF Power Output: 10mW (max.)
• Oscillation Mode: PLL synthesized, 16Channel selectable
• Frequency Stability: ±0.005%.
• Maximum Deviation: ±20kHz with limiting compressor
• Spurious Emission: ＞60dB below carrier frequency
• T.H.D.: ＜1,0% (at 1KHz)
• Microphone Capsule: uni-directional electret condenser unit
• Tone Signal: 32,768 kHz
• Battery: DC 3V (2x 1,5V AA size alkaline batteries ) OR DC 2.4V (2x 1,2V AA size rechargeable batteries)
• Current consumption: 120mA ±10mA @ 3V