AMP4600

The AMP4600 amplifier provides 4 × 600 W in-line 70/100 V power for medium- to large-scale installations requiring power and multi-zone management. Commercial spaces, sports facilities, professional buildings: when sound coverage expands and power requirements intensify, this four-channel amplifier becomes the obvious solution. Each 600 W channel supplies several zones, with volumes adjusted to each environment. The Class D architecture combines high power and advanced thermal dissipation, while rear-mounted controls ensure that only the technical team has access to essential parameters.

High power, minimal heat generation.
Class D technology allows this amplifier to deliver 4 × 600 W at 100 V with remarkable energy efficiency and controlled heat generation. The audio bandwidth spans the entire 20 Hz–20 kHz range with harmonic distortion below 0.05% and a signal-to-noise ratio greater than 100 dB. The thermoregulated cooling system automatically adjusts its speed based on actual temperature, ensuring reliability and longevity without generating noise.

Intelligent energy saving
The automatic standby system constantly monitors the input signal and switches to economy mode after 15 minutes of inactivity, thus reducing power consumption. This dynamic management of the audio flow optimizes energy costs without sacrificing responsiveness: the amplifier instantly returns to its nominal speed as soon as a signal is detected. A decisive advantage for reducing operating costs while minimizing the environmental footprint.

Built-in professional controls.
Each channel features its own level knob and a selectable high-pass filter (Flat/HPF 80 Hz), accessible exclusively from the rear panel. Euroblock connectors on all connections simplify installation and ensure secure connections. On the front panel, four LED indicators per channel (Signal, -20 dB, Clip, Protect) provide instant visual feedback on operating status. The 2U 19″ rack-mount enclosure houses all the electronics in a compact design, weighing only 8 kg.

Key Points.

– Output power: 4 x 600 W at 100 V
– Class D technology: optimum energy efficiency and reduced thermal output
– Installer controls on rear panel: volume control and HPF 80 Hz high-pass filter (Flat/HPF switching per channel)
– Automatic standby after 15 minutes of no signal
– Temperature-controlled fan for optimum temperature maintenance
– Euroblock terminal blocks: reinforced input and output connections for professional installation
– Front LED indicators: Signal, -20 dB, Clip, Protect
– Multiple protections: short-circuit, open circuit, overtemperature, limiter, HF and RF

Technical Specifications.

– Output impedance: 16 Ohms @ 100 V
– Input sensitivity: 0 dBV / 20 kΩ balanced
– Frequency response: 20 Hz – 20 kHz
– THD+N: < 0.05%
– Damping factor: > 500 @ 1 kHz
– Power supply: PFC switch-mode, AC 90-264 V, 50/60 Hz
– Controls: front ON/OFF switch, rear volume and HPF
– Dimensions: 483 x 88 x 425 mm (2U, 19″ format)
– Weight: 8 kg