PoE10-250

A single cable for both data and power.
The PoE10-250 connects and powers all PoE-compatible network equipment in one simple step: IP cameras, IP phones, or audio, Dante, and public address equipment. Each RJ45 port carries both data and power—up to 30 W per port—for a total power output of 250 W distributed across the eight ports. No more power adapters needed behind each device, and no more separate electrical wiring to run.

Seamless integration into a Dante network.
The PoE10-250 integrates seamlessly into a Dante installation: its 20 Gbps non-blocking switching and automatic MDI/MDI-X detection ensure lossless network audio transmission, while PoE power delivery to compatible interfaces and devices simplifies deployment across an entire site.

Enough power for the entire setup.
With 250 W distributed across its eight ports and up to 30 W available per port, the PoE10-250 simultaneously powers a large number of devices, from the lightest (controllers, interfaces) to the most power-hungry, without having to split the installation across multiple switches or closely monitor available power.

The natural companion to an Ami system.
The entire Ami lineup connects directly to it: matrices, AmiCTL1 and AmiCTL2 wall-mounted controllers, and AmiD2 and AmiD4 Dante interfaces. Nexus touchscreen tablets operate on the same principle. A single network cable is all that’s needed behind each mixer.

Rugged and easy to integrate.
IEEE 802.3at compliant, automatic detection and MDI/MDI-X adaptation, full or half duplex, 20 Gbit/s non-blocking switching. Requires at least Cat 5e cable. Compact 1U chassis, comes with 19″ rack mounting brackets.

Key Features:

• 8 10/100/1000 Mbps PoE ports, up to 30 W per port
• 2 RJ45 uplink ports, data only
• Total PoE power: 250 W
• IEEE 802.3at standard, 48 V power supply, Mode A
• Automatic MDI/MDI-X detection, full/half duplex
• 20 Gbit/s non-blocking switching
• Cat 5e cable (minimum)
• Compatible with all standard PoE equipment: IP cameras, IP phones, Dante devices, public address systems, the Aio and Ami product lines, and Nexus tablets

Technical Specifications:

• PoE Ports: 8 × RJ45 10/100/1000Base-T(X)
• Uplink ports: 2 × RJ45 10/100/1000 Mbps (data)
• Maximum power per port: 30 W (IEEE 802.3at)
• Total power: 250 W
• Wiring mode: Mode A, data and power, 1/2 (+) and 3/6 (−)
• PoE Voltage: 48 V
• Cable: Cat 5e or higher
• Transmission rate: 10 / 100 / 1000 Mbps
• Switching capacity: 20 Gbit/s non-blocking
• Protocols: IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3z, 802.3x
• Power supply: AC 110–240 V, 50/60 Hz
• Standby power consumption: < 18 W
• Operating temperature: 0–40 °C
• Dimensions: 270 × 180 × 45 mm
• Weight: 1.25 kg

Package contents:

• The PoE10-250 switch
• An IEC power cord
• A pair of 19-inch rack brackets