AmiD4

Microphone and line inputs, to the Dante network—and back to the local system.
The AmiD4 is the wall-mount unit in the Ami series designed to connect microphone or line sources directly to a Dante network, while simultaneously routing audio to a local sound system from the same location. Its two balanced combo inputs, with adjustable gain up to 20 dB and 48V phantom power switchable per channel, accept both condenser microphones and line-level sources. Its two balanced XLR outputs feed a local sound system in parallel.

Routing and Compatibility.
Dante signals are routed using the Dante Controller software. Powered via 802.3af PoE over a single network cable (PoE switch required). Compatible with the Dante versions of all mixers in the Ami series.

Technical Specifications:

• 2 balanced mic/line combo inputs
• 48V phantom power per channel, independently switchable
• Adjustable input gain up to 20 dB
• Sampling rate: 48 kHz / 24 bits
• 2 balanced XLR line outputs — local audio playback
• Dante 2-channel input / 2-channel output converter
• Routing via the Dante Controller software
• Compatible with the Dante versions of the entire Ami lineup
• Frequency response: 20 Hz – 20 kHz ±0.2 dB
• Maximum level: +18 dBu balanced
• THD: 0.002% @ 4 dBu
• Background noise: -97 dBu
• Input impedance: 20 kΩ
• Output impedance: 100 Ω
• Channel isolation @ 1 kHz: 100 dB
• Power: IEEE 802.3af PoE — PoE switch required
• Power consumption: < 5 W
• Dimensions: 95 × 110 × 50 mm
• Weight: 345 g

Supplied with:

• One small flat-head screwdriver
• 6 screws