Ami16D

The Ami16D—the same matrix, with Dante added.
The Ami16D is the Dante version of the Ami16: same 16×16 analog I/O, same DSP features and AmiControl software, plus a standalone 16×16 Dante interface—16 additional digital audio channels via a single RJ45 cable.

A high-capacity, ready-to-install rack-mount matrix.
The Ami16D is a 16×16 digital audio matrix in a 19″ 1U rack-mount format, with built-in mounting brackets for immediate installation in a rack. Its 16 balanced inputs and 16 balanced outputs via Euroblock connectors, adjustable input gain up to 48 dB, and 48V phantom power allow you to connect microphones, line-level sources, and amplifiers without any adapters. The front-panel display shows the IP address, name, and VU meters for the inputs and outputs.

Exceptional processing power.
The Ami16D features two ADI SHARC 21489 processors working in tandem to handle even the most complex setups without ever faltering. The DSP is fully configurable via AmiControl: Automix, echo and ambient noise suppression, parametric and graphic equalizers, delay, gate, compressor, limiter—independent and precise processing on every input and output. 16 exportable presets for effortless multi-site deployment.

An interface tailored to your client’s needs.
The installer can freely create the control interface for the end user using AmiControl (Windows), then manage it on a daily basis from Windows, Android, or iOS: custom design, logo, colors, and layout of faders and buttons. Access rights management precisely defines each user’s access.

Connectivity, GPIO, and professional protocols.
Built-in USB 2-in/2-out sound card, 8 configurable GPIO pins for integrating automation systems and third-party equipment, RS232, RS485, and UDP control with command capture integrated into AmiControl.

Technical Specifications:

• Processor: ADI SHARC 21489 (×2)
• Analog inputs: 16
• Analog outputs: 16
• Dante Interface: 16×16 independent
• Dante network ports: 2 — primary + secondary
• Sampling rate: 48 kHz / 24 bits
• Input gain: 0 to 48 dB (in 3 dB steps)
• Phantom power: 48V (10 mA max.)
• Frequency response: 20 Hz – 20 kHz ±0.3 dB
• Maximum input/output level: +18 dBu
• THD: < 0.003% @ 4 dBu
• Dynamic range (input/output): 110 dB / 112 dB
• Background noise (A-weighted): -91 dB
• CMRR @ 60 Hz: 80 dB
• Channel isolation @ 1 kHz: 108 dB
• Input impedance: 5.4 kΩ
• Output impedance: 600 Ω
• System latency: < 3 ms
• Audio Connectors: Balanced Euroblock
• GPIO: 8 configurable inputs/outputs
• USB sound card: 2 in / 2 out — 48K / 24-bit
• Control protocols: RS232, RS485, UDP
• Power Supply: AC 110–240 V, 50/60 Hz
• Maximum power consumption: 30 W
• Format: 19-inch 1U rack
• Dimensions: 482 × 260 × 45 mm
• Weight: 3 kg
• Included accessories: CE power cord, Euroblock connectors, USB-A/USB-C cable